Acrylic Art, French Cleat System Installation

Use a level to place the unattached French Cleat in the desired position. Using a pencil, mark two holes on the wall. Drill pilot holes in the center of each circle and insert wall anchors. We recommend a 3/16” drill bit.
With the sharp point away from the wall and pointed upwards, mount the French Cleat to the wall using the two 1/8” screws.
Hang the French Cleat attached to your product onto the bottom half mounted to the wall. Your Acrylic Art now locked firmly in position.

Acrylic Art, Stainless Post System Installation (Your Acrylic Art comes with four pre-drilled holes for Stainless Post assembly.)

Using a level, place your Acrylic Art against the wall in the desired location and trace the four holes with a pencil.
Drill pilot holes in the center of each circle and insert wall anchors. We recommend a 3/16” drill bit.
Using a Philips screwdriver, insert the included screws through the Stainless Post barrels and into the wall anchors.
Place your Acrylic Art against the Stainless Post barrels and insert the Stainless screw caps through the hole in the barrels. Hand tighten to secure the art pieces.

Thanks for reading. Until next blog!

—xoxo, L